| Overall Dimension |
| 1 | Length(with bucket on ground) | 7085(mm) |
| 2 | Width | 2313(mm) |
| 3 | Load Bucket width | 2313(mm) |
| 4 | Height(To the top of the cab) | 2710 (mm) |
| 5 | Height(To the top of the digging pole) | 3424 (mm) |
| 6 | Wheelbase | 2155.5(mm) |
| 7 | Back wheel Tread | 1700(mm) |
| 8 | Fore wheel Tread | 1880(mm) |
| 9 | Min. ground clearance | 355(mm) for 2WD 275(mm) for 4WD |
| Main Loading Technical Specification |
| 1 | Rated load | 1700(Kg) |
| 2 | Operating weight | 7600KG |
| 3 | Max lifting capability | >2500KG |
| 4 | Rated load bucket capacity | 1.0(m3) |
| 5 | Max. load breakout force | >60kN |
| 6 | Max. dump clearance | 2714(mm) |
| 7 | Max. Dump reach | 845(mm) |
| 8 | Dump angle at any position | ≥43.5° |
| 9 | Min. turning radius |
| | (1) Outside of bucket | 5280(mm) for 2WD 5670(mm) for 4WD |
| (2) Center of front wheel | 3795 (mm) for 2WD 4380(mm) for 4WD |
| 10 | Lifting time of loading bucket | ≤4.5(sec.) |
| 11 | Lowering time of loading bucket | ≤3.5(sec.) |
| 12 | Dumping time | ≤1.5(sec.) |
| 13 | Traveling speed(Km/h),4 forward and 4 reverse |
| | (1) Ⅰ gear forward | 6 |
| (2) Ⅱ gear forward | 9.6 |
| (3) Ⅲ gear forward | 20.5 |
| (4) IV gear forward | 38 |
| (1) Ⅰ gear reverse | 6 |
| | (2) Ⅱ gear reverse | 9.6 |
| (3) Ⅲ gear reverse | 20.5 |
| (4) IV gear reverse | 38 |
| Main Digging Technical Specification |
| 1 | Rated digging bucket capacity | 0.3(m3) |
| 2 | Max. digging depth | 4405(mm) |
| 3 | Max. digging force | >50±10%kN |
| 4 | Max. digging radius | 5481(mm) |
| 5 | Max. dumping height | 3737(mm) |
| Diesel engine |
| 1 | Model | WP4G | DongFeng 4BTA3.9-C110 |
| 2 | Type | Direct injection. Turbocharged. Water cooling |
| 3 | Rated power / Rated speed | 70 (kW) / 2200(r/min) | 82 (kW) / 2200(r/min) |
| 4 | Displacement | 4.5(L) | 3.9(L) |
| 5 | Inter-bore of cylinder/stroke | 102/138(mm) | 102/120(mm) |
| 6 | Model, Voltage and Power of starting motor | ST9371 12(V) 4.8(kW) | ST 9501 12(V) 6(kw) |
| 7 | Model, Voltage and Starting Current of Alternator | EE9242 12(V) 95Amp | EE 9235 14(V) 70Amp |
| 8 | Max. Torque | 414(N.M) @1500RPM | 460N.m@1500RPM |
| 9 | Starting type | Electric |
| 10 | Min. specific fuel consumption | 207(g/Kw.h) | |
| Transmission System |
| 1. Torque Converter |
| 1 | Model | CARRARO |
| 2 | Cooling type | Pressure oil circulating |
| 2. Transmission case |
| 1 | Model | CARRARO |
| 2 | Type | Synchromesh mechanical shift |
| 3 | Gear shift position | 4 Forward and 4 reverse gears |
| 3. Axle and Tire |
| 1 | Model | CARRARO |
| 2 | Type of main reducer | spiral bevel gear, single stage |
| 3 | Type of final reducer | Single stage planetary |
| 4 | Max. steering angle | 55° |
| 5 | Tire type | 4WD fore tire12-16.5NHS-10PR |
| 2WD fore tire11L-16F3-12PR |
| Rear tire 19.5L-24R4-12PR |
| Working Device Hydraulic System |
| 1 | Model of oil pump | K2215(CASAPPA) |
| 2 | System pressure | 230(kgf/cm2) |
| 3 | Model of priority valve | WALVOIL SDS180 |
| Steering System |
| 1 | Type | Fore wheel Steering |
| 2 | Model of steering pump | K2215(CASAPPA) |
| 3 | Model of steering gear | 150-1219(DAIVFOSS) |
| 4 | System pressure | 140(kgf/cm2) |
| Oil Capacity |
| 1 | Fuel(diesel) | 151(L) |
| 2 | Engine lubricating oil | 11(L) |
| 3 | Oil for converter and gear box | 18.5(L) |
| 4 | Oil for hydraulic system | 110(L) |
| 5 | Oil for driving axles(F/R) | 7.6+17(L) |
